Telford Hurricane 125L Indirect series offers installers a competitively priced high quality unvented cylinder that delivers mains pressure hot water with high flow rates to showers and baths without the need of a boost pump. Manufactured from corrosion-resistant duplex 2304 stainless-steel with recyclable CFC/HCFC free polyurethane foam insulation, the Indirect series is ideal for residential, rental and light commercial properties using a Gas/Oil boiler as the primary heat source.
Key Features:
- Duplex stainless-steel provides superior corrosion resistance
- 316L grade stainless-steel 22mm compression fittings and coils
- Supplies mains pressure hot water and high flow rates
- Fast reheat
- Factory-fitted temperature and pressure relief value set at 7 bar / 90°C
- Remote expansion vessel with factory-fitted wall mounting bracket
- Full unvented kit supplied
- Highly efficient
- Fully insulated to minimise any heat loss
- Factory-fitted 3kW immersion heater
- Available in 90–300 litre capacities
- Lifetime manufacturing warranty on inner container (2 years on components)*
Technical Specifications:
- Manufacturer: Telford
- Range: Hurricane
- Product Code: HURI125
- Cylinder Type: Unvented
- Configuration: Indirect
- Nominal Capacity (L): 125
- Height (mm): 1060
- Diameter (mm): 510
- Weight (kg): 35
- Weight Full (kg): 156
- No. Immersion Heaters: 1
- Heat Loss (kWh/24): 1.64
- ErP Rating: C
- Pressure Regulator (bar): 12
Telford Hurricane 150L Indirect series offers installers a competitively priced high quality unvented cylinder that delivers mains pressure hot water with high flow rates to showers and baths without the need of a boost pump. Manufactured from corrosion-resistant duplex 2304 stainless-steel with recyclable CFC/HCFC free polyurethane foam insulation, the Indirect series is ideal for residential, rental and light commercial properties using a Gas/Oil boiler as the primary heat source.
Key Features:
- Duplex stainless-steel provides superior corrosion resistance
- 316L grade stainless-steel 22mm compression fittings and coils
- Supplies mains pressure hot water and high flow rates
- Fast reheat
- Factory-fitted temperature and pressure relief value set at 7 bar / 90°C
- Remote expansion vessel with factory-fitted wall mounting bracket
- Full unvented kit supplied
- Highly efficient
- Fully insulated to minimise any heat loss
- Factory-fitted 3kW immersion heater
- Available in 90–300 litre capacities
- Lifetime manufacturing warranty on inner container (2 years on components)*
Technical Specifications:
- Manufacturer: Telford
- Range: Hurricane
- Product Code: HURI150
- Cylinder Type: Unvented
- Configuration: Indirect
- Nominal Capacity (L): 150
- Height (mm): 1060
- Diameter (mm): 510
- Weight (kg): 38
- Weight Full (kg): 187
- No. Immersion Heaters: 1
- Heat Loss (kWh/24): 1.85
- ErP Rating: C
- Pressure Regulator (bar): 12
Telford Hurricane 170L Indirect series offers installers a competitively priced high quality unvented cylinder that delivers mains pressure hot water with high flow rates to showers and baths without the need of a boost pump. Manufactured from corrosion-resistant duplex 2304 stainless-steel with recyclable CFC/HCFC free polyurethane foam insulation, the Indirect series is ideal for residential, rental and light commercial properties using a Gas/Oil boiler as the primary heat source.
Key Features:
- Duplex stainless-steel provides superior corrosion resistance
- 316L grade stainless-steel 22mm compression fittings and coils
- Supplies mains pressure hot water and high flow rates
- Fast reheat
- Factory-fitted temperature and pressure relief value set at 7 bar / 90°C
- Remote expansion vessel with factory-fitted wall mounting bracket
- Full unvented kit supplied
- Highly efficient
- Fully insulated to minimise any heat loss
- Factory-fitted 3kW immersion heater
- Available in 90–300 litre capacities
- Lifetime manufacturing warranty on inner container (2 years on components)*
Technical Specifications:
- Manufacturer: Telford
- Range: Hurricane
- Product Code: HURI170
- Cylinder Type: Unvented
- Configuration: Indirect
- Nominal Capacity (L): 150
- Height (mm): 1200
- Diameter (mm): 510
- Weight (kg): 42
- Weight Full (kg): 210
- No. Immersion Heaters: 1
- Heat Loss (kWh/24): 1.97
- ErP Rating: C
- Pressure Regulator (bar): 12
Telford Hurricane 200L Indirect series offers installers a competitively priced high quality unvented cylinder that delivers mains pressure hot water with high flow rates to showers and baths without the need of a boost pump. Manufactured from corrosion-resistant duplex 2304 stainless-steel with recyclable CFC/HCFC free polyurethane foam insulation, the Indirect series is ideal for residential, rental and light commercial properties using a Gas/Oil boiler as the primary heat source.
Key Features:
- Duplex stainless-steel provides superior corrosion resistance
- 316L grade stainless-steel 22mm compression fittings and coils
- Supplies mains pressure hot water and high flow rates
- Fast reheat
- Factory-fitted temperature and pressure relief value set at 7 bar / 90°C
- Remote expansion vessel with factory-fitted wall mounting bracket
- Full unvented kit supplied
- Highly efficient
- Fully insulated to minimise any heat loss
- Factory-fitted 3kW immersion heater
- Available in 90–300 litre capacities
- Lifetime manufacturing warranty on inner container (2 years on components)*
Technical Specifications:
- Manufacturer: Telford
- Range: Hurricane
- Product Code: HURI200
- Cylinder Type: Unvented
- Configuration: Indirect
- Nominal Capacity (L): 200
- Height (mm): 1150
- Diameter (mm): 580
- Weight (kg): 46
- Weight Full (kg): 240
- No. Immersion Heaters: 1
- Heat Loss (kWh/24): 1.85
- ErP Rating: C
- Pressure Regulator (bar): 12
Telford Hurricane 250L Indirect series offers installers a competitively priced high quality unvented cylinder that delivers mains pressure hot water with high flow rates to showers and baths without the need of a boost pump. Manufactured from corrosion-resistant duplex 2304 stainless-steel with recyclable CFC/HCFC free polyurethane foam insulation, the Indirect series is ideal for residential, rental and light commercial properties using a Gas/Oil boiler as the primary heat source.
Key Features:
- Duplex stainless-steel provides superior corrosion resistance
- 316L grade stainless-steel 22mm compression fittings and coils
- Supplies mains pressure hot water and high flow rates
- Fast reheat
- Factory-fitted temperature and pressure relief value set at 7 bar / 90°C
- Remote expansion vessel with factory-fitted wall mounting bracket
- Full unvented kit supplied
- Highly efficient
- Fully insulated to minimise any heat loss
- Factory-fitted 3kW immersion heater
- Available in 90–300 litre capacities
- Lifetime manufacturing warranty on inner container (2 years on components)*
Technical Specifications:
- Manufacturer: Telford
- Range: Hurricane
- Product Code: HURI250
- Cylinder Type: Unvented
- Configuration: Indirect
- Nominal Capacity (L): 250
- Height (mm): 1500
- Diameter (mm): 580
- Weight (kg): 55
- Weight Full (kg): 301
- No. Immersion Heaters: 1
- Heat Loss (kWh/24): 2.00
- ErP Rating: C
- Pressure Regulator (bar): 12
Telford Hurricane 300L Indirect series offers installers a competitively priced high quality unvented cylinder that delivers mains pressure hot water with high flow rates to showers and baths without the need of a boost pump. Manufactured from corrosion-resistant duplex 2304 stainless-steel with recyclable CFC/HCFC free polyurethane foam insulation, the Indirect series is ideal for residential, rental and light commercial properties using a Gas/Oil boiler as the primary heat source.
Key Features:
- Duplex stainless-steel provides superior corrosion resistance
- 316L grade stainless-steel 22mm compression fittings and coils
- Supplies mains pressure hot water and high flow rates
- Fast reheat
- Factory-fitted temperature and pressure relief value set at 7 bar / 90°C
- Remote expansion vessel with factory-fitted wall mounting bracket
- Full unvented kit supplied
- Highly efficient
- Fully insulated to minimise any heat loss
- Factory-fitted 3kW immersion heater
- Available in 90–300 litre capacities
- Lifetime manufacturing warranty on inner container (2 years on components)*
Technical Specifications:
- Manufacturer: Telford
- Range: Hurricane
- Product Code: HURI300
- Cylinder Type: Unvented
- Configuration: Indirect
- Nominal Capacity (L): 300
- Height (mm): 1750
- Diameter (mm): 580
- Weight (kg): 61
- Weight Full (kg): 355
- No. Immersion Heaters: 1
- Heat Loss (kWh/24): 2.22
- ErP Rating: C
- Pressure Regulator (bar): 12
Telford Hurricane 90L Indirect series offers installers a competitively priced high quality unvented cylinder that delivers mains pressure hot water with high flow rates to showers and baths without the need of a boost pump. Manufactured from corrosion-resistant duplex 2304 stainless-steel with recyclable CFC/HCFC free polyurethane foam insulation, the Indirect series is ideal for residential, rental and light commercial properties using a Gas/Oil boiler as the primary heat source.
Key Features:
- Duplex stainless-steel provides superior corrosion resistance
- 316L grade stainless-steel 22mm compression fittings and coils
- Supplies mains pressure hot water and high flow rates
- Fast reheat
- Factory-fitted temperature and pressure relief value set at 7 bar / 90°C
- Remote expansion vessel with factory-fitted wall mounting bracket
- Full unvented kit supplied
- Highly efficient
- Fully insulated to minimize any heat loss
- Factory-fitted 3kW immersion heater
- Available in 90–300 litre capacities
- Lifetime manufacturing warranty on inner container (2 years on components)*
Technical Specifications:
- Manufacturer: Telford
- Range: Hurricane
- Product Code:HURI090
- Cylinder Type: Unvented
- Configuration: Indirect
- Nominal Capacity (L): 90
- Height (mm): 750
- Diameter (mm): 510
- Weight (kg): 35
- Weight Full (kg): 121
- No. Immersion Heaters: 1
- Heat Loss (kWh/24): 1.59
- ErP Rating: C
- Pressure Regulator (bar): 12
