Telford Hurricane 125L range offers installers a competitively priced high quality unvented cylinder that delivers mains pressure hot water with high flow rates to showers and baths without the need of a boost pump. Manufactured from corrosion-resistant duplex 2304 stainless-steel with recyclable CFC/HCFC free polyurethane foam insulation, the Direct series is ideal for use in residential, rental and light commercial properties without a gas/oil boiler, where an electrically heated hot water solution is required.
Key Features
- Duplex stainless-steel provides superior corrosion resistance
- 316L grade stainless-steel 22mm compression fittings and coils
- Supplies mains pressure hot water and high flow rates
- Fast reheat
- Factory-fitted temperature and pressure relief value set at 7 bar / 90°C
- Remote expansion vessel with factory-fitted wall mounting bracket
- Full unvented kit supplied
- Highly efficient
- Fully insulated to minimise any heat loss
- Factory-fitted 3kW immersion heater
- Available in 90–300 litre capacities
- Lifetime manufacturing warranty on inner container (2 years on components)*
Techical Specififcation:
- Manufacturer: Telford
- Range: Hurricane
- Product Code: HURD125
- Cylinder Type: Unvented
- Configuration: Direct
- Nominal Capacity (L): 125
- Height (mm): 870
- Diameter (mm): 510
- Weight (kg): 33
- Weight Full (kg): 154
- Heat Loss (kWh/24): 1.64
- Immersion Heater Rating: 2 X 3kw 240v
- Max incoming supply pressure (bar): 12
Telford Hurricane 150L range offers installers a competitively priced high quality unvented cylinder that delivers mains pressure hot water with high flow rates to showers and baths without the need of a boost pump. Manufactured from corrosion-resistant duplex 2304 stainless-steel with recyclable CFC/HCFC free polyurethane foam insulation, the Direct series is ideal for use in residential, rental and light commercial properties without a gas/oil boiler, where an electrically heated hot water solution is required.
Key Features
- Duplex stainless-steel provides superior corrosion resistance
- 316L grade stainless-steel 22mm compression fittings and coils
- Supplies mains pressure hot water and high flow rates
- Fast reheat
- Factory-fitted temperature and pressure relief value set at 7 bar / 90°C
- Remote expansion vessel with factory-fitted wall mounting bracket
- Full unvented kit supplied
- Highly efficient
- Fully insulated to minimise any heat loss
- Factory-fitted 3kW immersion heater
- Available in 90–300 litre capacities
- Lifetime manufacturing warranty on inner container (2 years on components)*
Techical Specififcation:
- Manufacturer: Telford
- Range: Hurricane
- Product Code: HURD150
- Cylinder Type: Unvented
- Configuration: Direct
- Nominal Capacity (L): 150
- Height (mm): 1060
- Diameter (mm): 510
- Weight (kg): 36
- Weight Full (kg): 185
- Heat Loss (kWh/24): 1.85
- Immersion Heater Rating: 2 X 3kw 240v
- Max incoming supply pressure (bar): 12
Telford Hurricane 170L range offers installers a competitively priced high quality unvented cylinder that delivers mains pressure hot water with high flow rates to showers and baths without the need of a boost pump. Manufactured from corrosion-resistant duplex 2304 stainless-steel with recyclable CFC/HCFC free polyurethane foam insulation, the Direct series is ideal for use in residential, rental and light commercial properties without a gas/oil boiler, where an electrically heated hot water solution is required.
Key Features
- Duplex stainless-steel provides superior corrosion resistance
- 316L grade stainless-steel 22mm compression fittings and coils
- Supplies mains pressure hot water and high flow rates
- Fast reheat
- Factory-fitted temperature and pressure relief value set at 7 bar / 90°C
- Remote expansion vessel with factory-fitted wall mounting bracket
- Full unvented kit supplied
- Highly efficient
- Fully insulated to minimise any heat loss
- Factory-fitted 3kW immersion heater
- Available in 90–300 litre capacities
- Lifetime manufacturing warranty on inner container (2 years on components)*
Techical Specififcation:
- Manufacturer: Telford
- Range: Hurricane
- Product Code: HURD170
- Cylinder Type: Unvented
- Configuration: Direct
- Nominal Capacity (L): 1200
- Height (mm): 1060
- Diameter (mm): 510
- Weight (kg): 40
- Weight Full (kg): 208
- Heat Loss (kWh/24): 1.97
- Immersion Heater Rating: 2 X 3kw 240v
- Max incoming supply pressure (bar): 12
Telford Hurricane 200L range offers installers a competitively priced high quality unvented cylinder that delivers mains pressure hot water with high flow rates to showers and baths without the need of a boost pump. Manufactured from corrosion-resistant duplex 2304 stainless-steel with recyclable CFC/HCFC free polyurethane foam insulation, the Direct series is ideal for use in residential, rental and light commercial properties without a gas/oil boiler, where an electrically heated hot water solution is required.
Key Features
- Duplex stainless-steel provides superior corrosion resistance
- 316L grade stainless-steel 22mm compression fittings and coils
- Supplies mains pressure hot water and high flow rates
- Fast reheat
- Factory-fitted temperature and pressure relief value set at 7 bar / 90°C
- Remote expansion vessel with factory-fitted wall mounting bracket
- Full unvented kit supplied
- Highly efficient
- Fully insulated to minimise any heat loss
- Factory-fitted 3kW immersion heater
- Available in 90–300 litre capacities
- Lifetime manufacturing warranty on inner container (2 years on components)*
Techical Specififcation:
- Manufacturer: Telford
- Range: Hurricane
- Product Code: HURD200
- Cylinder Type: Unvented
- Configuration: Direct
- Nominal Capacity (L): 200
- Height (mm): 1150
- Diameter (mm): 580
- Weight (kg): 44
- Weight Full (kg): 238
- Heat Loss (kWh/24): 1.85
- Immersion Heater Rating: 2 X 3kw 240v
- Max incoming supply pressure (bar): 12
Telford Hurricane 250L range offers installers a competitively priced high quality unvented cylinder that delivers mains pressure hot water with high flow rates to showers and baths without the need of a boost pump. Manufactured from corrosion-resistant duplex 2304 stainless-steel with recyclable CFC/HCFC free polyurethane foam insulation, the Direct series is ideal for use in residential, rental and light commercial properties without a gas/oil boiler, where an electrically heated hot water solution is required.
Key Features
- Duplex stainless-steel provides superior corrosion resistance
- 316L grade stainless-steel 22mm compression fittings and coils
- Supplies mains pressure hot water and high flow rates
- Fast reheat
- Factory-fitted temperature and pressure relief value set at 7 bar / 90°C
- Remote expansion vessel with factory-fitted wall mounting bracket
- Full unvented kit supplied
- Highly efficient
- Fully insulated to minimise any heat loss
- Factory-fitted 3kW immersion heater
- Available in 90–300 litre capacities
- Lifetime manufacturing warranty on inner container (2 years on components)*
Techical Specififcation:
- Manufacturer: Telford
- Range: Hurricane
- Product Code: HURD250
- Cylinder Type: Unvented
- Configuration: Direct
- Nominal Capacity (L): 250
- Height (mm): 1500
- Diameter (mm): 580
- Weight (kg): 53
- Weight Full (kg): 299
- Heat Loss (kWh/24): 2.00
- Immersion Heater Rating: 2 X 3kw 240v
- Max incoming supply pressure (bar): 12
Telford Hurricane 300L range offers installers a competitively priced high quality unvented cylinder that delivers mains pressure hot water with high flow rates to showers and baths without the need of a boost pump. Manufactured from corrosion-resistant duplex 2304 stainless-steel with recyclable CFC/HCFC free polyurethane foam insulation, the Direct series is ideal for use in residential, rental and light commercial properties without a gas/oil boiler, where an electrically heated hot water solution is required.
Key Features
- Duplex stainless-steel provides superior corrosion resistance
- 316L grade stainless-steel 22mm compression fittings and coils
- Supplies mains pressure hot water and high flow rates
- Fast reheat
- Factory-fitted temperature and pressure relief value set at 7 bar / 90°C
- Remote expansion vessel with factory-fitted wall mounting bracket
- Full unvented kit supplied
- Highly efficient
- Fully insulated to minimise any heat loss
- Factory-fitted 3kW immersion heater
- Available in 90–300 litre capacities
- Lifetime manufacturing warranty on inner container (2 years on components)*
Techical Specififcation:
- Manufacturer: Telford
- Range: Hurricane
- Product Code: HURD300
- Cylinder Type: Unvented
- Configuration: Direct
- Nominal Capacity (L): 300
- Height (mm): 1750
- Diameter (mm): 580
- Weight (kg): 59
- Weight Full (kg): 353
- Heat Loss (kWh/24): 2.22
- Immersion Heater Rating: 2 X 3kw 240v
- Max incoming supply pressure (bar): 12
Telford Hurricane 90L range offers installers a competitively priced high quality unvented cylinder that delivers mains pressure hot water with high flow rates to showers and baths without the need of a boost pump. Manufactured from corrosion-resistant duplex 2304 stainless-steel with recyclable CFC/HCFC free polyurethane foam insulation, the Direct series is ideal for use in residential, rental and light commercial properties without a gas/oil boiler, where an electrically heated hot water solution is required.
Key Features
- Duplex stainless-steel provides superior corrosion resistance
- 316L grade stainless-steel 22mm compression fittings and coils
- Supplies mains pressure hot water and high flow rates
- Fast reheat
- Factory-fitted temperature and pressure relief value set at 7 bar / 90°C
- Remote expansion vessel with factory-fitted wall mounting bracket
- Full unvented kit supplied
- Highly efficient
- Fully insulated to minimise any heat loss
- Factory-fitted 3kW immersion heater
- Available in 90–300 litre capacities
- Lifetime manufacturing warranty on inner container (2 years on components)*
Techical Specififcation:
- Manufacturer: Telford
- Range: Hurricane
- Product Code: HURD090
- Cylinder Type: Unvented
- Configuration: Direct
- Nominal Capacity (L): 90
- Height (mm): 750
- Diameter (mm): 510
- Weight (kg): 30
- Weight Full (kg): 119
- Heat Loss (kWh/24): 1.59
- Immersion Heater Rating: 2 X 3kw 240v
- Max incoming supply pressure (bar): 12
