Heat Input 35kW (120,102Btu's)
Minimum Heat Output 12.7kW (43,435Btu’s)
Temperature Setting RangeºC 38/85
Expansion Vessel Capacity 6 Litres
Maximum Working Pressure 3.00 bar
System Cold Fill Pressure 1.3 bar
Normal Operating PressureRange1.3 to 2.7bar
Available Pump Pressure (at 1000 litres/hr) 0.3 bar kPa 30
Domestic Hot Water
Heat Input 35.2kW (120,102Btu's)
Temperature Setting Range ºC 35/55
Normal Working Pressure Range 0.3 to 5.0 bar
Minimum Working Pressure Range 0.3 bar
Maximum Pressure 10.00 Bar
Minimum Flow Rate 2.5 l/min
Other Data
Height 703mm
Width 400mm
Depth 325mm
Weight 39kg
C.H. Inlet & Outlet Connections 22mm / ¾"
Gas Inlet Connection 22mm / ¾“
D.H.W Inlet & Outlet Connection 15mm / ½"
Standard Flue Pipe (Nominal Length 750mm) 60/100mmMaximum Horizontal Length of Flue Pipe 2.0m
Minimum Horizontal Length of Flue Pipe 0.5m
Building Regulations – Part L compliant
Clearance Requirements
Top & Bottom 200mm
Left Hand Side 25mmRight Hand Side 50mm
Minimum Front Clearance requirements in Operation 50mm
Minimum Front Clearance requirements for Servicing and Maintenance 600mm
Why choose a Biasi Combi Boiler?
- Ultra-compact design
- Elegant Italian styling
- Beautiful, gloss white casing
- Designed to be wall mounted thus saving you valuable space
- Hot water supplied at mains pressure
- Wide choice of flueing options including vertical and multi-directional, room-sealed balanced flues that expel flue gases to the outside via integral fan units
- Electronic ignition system
- Automatic boiler bypass
- Frost Protection System
- New, advanced 24 hour Electronic Programmer
- All Biasi combi boilers are manufactured to comply with all EU Safety Standards
-
32 kW (109,184 Btu’s) output.
-
Ideal for the larger home and supplying that extra Domestic Hot Water requirement.
So easy to install and maintain
No tank or cylinder
Minimal pipe work
Substantial savings on materials
Quick & easy installation
Easy access to all main components
Servicing time and bills greatly reduced
Conversion Kits available for liquid petroleum gas users
Pipe work to the boiler can be completed prior to the boiler installation with the aid of a pre pipe fixing jig.
It is also possible to hide the pipe work behind the boiler through the use of a concealed pipe work jig.
Both jigs are available as additional accessories.
Simple controls save you even more
All Riva Compact combi boilers have electronic ignition, without a pilot flame - saving on gas bills.
They also come with a fitted 24 hour electronic programmer as standard so you can control your heating and hot water needs precisely according to the demands of your
household.
Service and Support
Biasi UK aims to provide quality Technical Service and Support.
Our Technical Helpline 01902 304400 is available Monday to Saturday for specific telephone advice.
In the unlikely event that a service visit is required, our nation-wide network of Service Agents will endeavor to attend within 24hrs (normal working days) or at a mutually agreed time.
Please click on the Specification link below. This is the manufacturers brochure with all details you may need for installation format
Need help viewing this PDF document? Follow the link to our Help With PDFs Section
|
|
|
|
|
|
Go with the flow ...
• Automatic boiler bypass
• Anti-scale control system
• Frost protection system
• Electronic ignition system
• Ultra-compact dimensions
• Wide choice of flueing options
• 24 hour electronic programmer
• 32 kW (109,184 Btu’s) output. Ideal for the larger home and supplying that extra Domestic Hot Water requirement.
• No compartment ventilation required
• LPG Kits available |
Important Instructions
This is a NON condensing boiler please go to our shop for condensing boilers
All boilers need to be fitted by registered CORGI fitters and will have to be approved by them.
Please do not purchase any items without consulting your CORGI REG plumber before purchasing.
We are not permitted to re-sell second hand boilers due to CORGI GAS SAFETY.
Once opened a restocking charge would have to be charged due to the fact they are not re-salable. They will have to be re-tested, and re-sealed by the manufactures, hence the need of a restocking charge on all boilers.
