Product Specifications

• Working voltage: 220 - 240 Volts
• Power consumption: 2500 - 2800 Watts
• Maximum current draw: 15.8 - 17.3 Amps
• Water consumption: 900 - 1200 litres per hour
• Working water pressure of steam generator: 0.75 Bar
• Water supply requirement: separate hot and cold inputs are required, each at a pressure of 1.5 - 3 Bar.
• NB: if the water pressure is below this range a twin negative head pump must be used to boost the hot and cold supply
• A pump must not be used on the output of a combi boiler.

Installation Guidelines

150mm clearance must be allowed for between the cabin roof and ceiling to allow adequate venting. It is essential that a fully qualified electrician and fully qualified plumber install the unit in accordance with current regulations. The product requires hard wiring into the mains.